4PCS 36106877937 TPMS Sensor For BMW 1-Series F40 2-Series G42 3-Serie

Selling Point
Note1:

Pls Use the vehicle fitment we've provided within the body of the listing to confirm vehicle fitment.If you can not make sure which item fit for your car,please send the VIN CODE to us confirm it before order.

Note2:

【No sensor programming Required】 : The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or "re-learning". Simplified Relearn : Scal tool Relearn Installation of TPMS is recommended to be performed only by trained professionals.

SPECIFICATION :
Replace For Part Number:6877937 6877936 36106877937
Battery Life: ABOUT 3 YEAR
Operating Frequency: 433.92 MHz
PACKAGE CONTENT : NORMAL PACKET

EU
For Alpina 3(from 2020-08 to 2026-01)
For Alpina 4(from 2022-07 to 2027-08)
For Alpina 4(from 2022-07 to 2030-03)
For BMW 1-Series [F40](from 2019-10 to 2024-09)
For BMW 2-Series [G42](from 2021-11 to 2035-09)

For BMW 2-Series [NB2](from 2022-04 to 2029-06)

For BMW 2-Series Active Tourer [U06](from 2022-03 to 2029-06)

For BMW 2-Series Gran Coupe [F74](from 2020-03 to 2024-12)

For BMW 3-Series [G20](from 2019-03 to 2025-10)

For BMW 4-Series [G22](from 2020-09 to 2027-08)

For BMW 4-Series Gran Coupe [G26](from 2021-08 to 2027-10)

For BMW i4 [G26](from 2021-10 to 2027-02)

For BMW iX1 [U11](from 2022-11 to 2027-12)

For BMW X1 [U11](from 2022-10 to 2029-09)

For BMW XM [G09](from 2023-03 to 2029-05)

For BMW Z4 [G29](from 2019-03 to 2026-01)

For Toyota Supra(from 2019-08 to 2026-04)

For BMW 3-Series(from 2019-02 to 2028-07)

For BMW 4-Series(from 2020-10 to 2029-05)

For BMW X1(from 2022-09 to 2030-10)

For BMW Z4(from 2019-03 to 2026-06)

For Rolls-Royce Cullinan(from 2019-01 to 2027-12)

Attention: The only way to be 100% sure that the part will fit your vehicle is to check your original part number.

COMPREHENSIVE VEHICLE COVERAGE
Installation Process
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.